Siddhgiri Tubes is one of the leading manufacturers and suppliers of Inconel 825 Sheets and Plates.
Incoloy 825 Sheets & Plates, Incoloy 825 Sheets & Plates Manufacturers, Incoloy 825 Sheets & Plates Suppliers, Incoloy 825 Sheets & Plates Stockists, Incoloy 825 Sheets & Plates Exporters
Incoloy 825 plate & sheet has high corrosion resistance. It contains high nickel content which is sufficient to chloride ion stress corrosion cracking resistance.
Incoloy 825 Sheets & Plates in India, Incoloy 825 Sheets & Plates Manufacturers in India, Incoloy 825 Sheets & Plates Suppliers in India, Incoloy 825 Sheets & Plates Stockists in India, Incoloy 825 Sheets & Plates Exporters in India
Alloy 800H Plate is a slightly modified version of Incoloy 800 Plates, possessing higher creep and rupture strength.
Incoloy 825 Sheets & Plates in Mumbai, Incoloy 825 Sheets & Plates Manufacturers in Mumbai, Incoloy 825 Sheets & Plates Suppliers in Mumbai, Incoloy 825 Sheets & Plates Stockists in Mumbai, Incoloy 825 Sheets & Plates Exporters in Mumbai
It can resist general corrosion, intergranular corrosion, pitting & crevice corrosion, and stress corrosion cracking in reducing & oxidizing conditions. It can be easily hot or cold worked. It is especially used in phosphoric & sulphuric acids, sulphur containing flue gases, oil wells, sour gas and sea water.
Specification Chart of Incoloy 825 Sheets & Plates
| Grade | ASTM B409/ ASME SB409 800 |
|---|---|
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 12 mm Thk |
| Standards | ASTM / ASME SB 168 |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Chemical Composition Of Incoloy 825 Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Mechanical Properties Of Incoloy 825 Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |