Siddhgiri Tubes is one of the leading manufacturers and suppliers of Inconel 800H Sheets and Plates.
Incoloy 800H Sheets & Plates, Incoloy 800H Sheets & Plates Manufacturers, Incoloy 800H Sheets & Plates Suppliers, Incoloy 800H Sheets & Plates Stockists, Incoloy 800H Sheets & Plates Exporters
Incoloy 800H and HT is iron, chromium and nickel alloy that is also having good strength and resistance ability.
Incoloy 800H Sheets & Plates in India, Incoloy 800H Sheets & Plates Manufacturers in India, Incoloy 800H Sheets & Plates Suppliers in India, Incoloy 800H Sheets & Plates Stockists in India, Incoloy 800H Sheets & Plates Exporters in India
Alloy 800H Plate is a slightly modified version of Incoloy 800 Plates, possessing higher creep and rupture strength.
Incoloy 800H Sheets & Plates in Mumbai, Incoloy 800H Sheets & Plates Manufacturers in Mumbai, Incoloy 800H Sheets & Plates Suppliers in Mumbai, Incoloy 800H Sheets & Plates Stockists in Mumbai, Incoloy 800H Sheets & Plates Exporters in Mumbai
Alloy 800HT Plate has an addition of up 1.0% aluminum and titanium. Incoloy Alloy 800 Coil has good creep-rupture properties at temperatures above 1100°F (600°C).
Specification Chart of Incoloy 800H Sheets & Plates
| Grade | ASTM B409/ ASME SB409 800 |
|---|---|
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 12 mm Thk |
| Standards | ASTM / ASME SB 168 |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Chemical Composition Of Incoloy 800H Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 800H | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
Mechanical Properties Of Incoloy 800H Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| 800H | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |