Siddhgiri Tubes is one of the leading manufacturers and suppliers of Monel K500 Sheets and Plate.
Monel K500 Sheets & Plates, Monel K500 Sheets & Plates Manufacturers, Monel K500 Sheets & Plates Suppliers, Monel K500 Sheets & Plates Stockists, Monel K500 Sheets & Plates Exporters
Monel K500 exhibits the same high corrosion resistance as Monel 400, with greater strength and hardness.
Monel K500 Sheets & Plates in India, Monel K500 Sheets & Plates Manufacturers in India, Monel K500 Sheets & Plates Suppliers in India, Monel K500 Sheets & Plates Stockists in India, Monel K500 Sheets & Plates Exporters in India
Monel Alloy K500 sheets are high-performance sheets made from an alloy of nickel, copper, and aluminum called Monel K500. These sheets are known for their exceptional strength, toughness, and resistance to corrosion in a variety of environments.
Monel K500 Sheets & Plates in Mumbai, Monel K500 Sheets & Plates Manufacturers in Mumbai, Monel K500 Sheets & Plates Suppliers in Mumbai, Monel K500 Sheets & Plates Stockists in Mumbai, Monel K500 Sheets & Plates Exporters in Mumbai
Monel K500 sheets are commonly used in various industries such as marine, chemical processing, and oil and gas.
Specification Chart of Monel K500 Sheets & Plates
| Grade | ASTM B409/ ASME SB409 800 |
|---|---|
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 12 mm Thk |
| Standards | ASTM / ASME SB 168 |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Chemical Composition Of Monel K500 Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Monel K500 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties Of Monel K500 Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Monel K500 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |