Siddhgiri Tubes is one of the leading manufacturers and suppliers of Inconel 718 Sheets & Plates.
Inconel 718 Sheets & Plates, Inconel 718 Sheets & Plates Manufacturers, Inconel 718 Sheets & Plates Suppliers, Inconel 718 Sheets & Plates Stockists, Inconel 718 Sheets & Plates Exporters
Inconel 718 Plates (UNS N07718) can be cut using any conventional plasma arc cutting system. The best arc quality is achieved using a mixture of argon and hydrogen gases.
Inconel 718 Sheets & Plates in India, Inconel 718 Sheets & Plates Manufacturers in India, Inconel 718 Sheets & Plates Suppliers in India, Inconel 718 Sheets & Plates Stockists in India, Inconel 718 Sheets & Plates Exporters in India
Inconel 718 is an incredibly strong nickel-based alloy made with iron, niobium, and molybdenum.This alloy makes for a versatile yet tough material that can withstand high temperatures, corrosion, oxidation, and even pressure.
Inconel 718 Sheets & Plates in Mumbai, Inconel 718 Sheets & Plates Manufacturers in Mumbai, Inconel 718 Sheets & Plates Suppliers in Mumbai, Inconel 718 Sheets & Plates Stockists in Mumbai, Inconel 718 Sheets & Plates Exporters in Mumbai
Inconel 718 plate is used in many industries, such as chemical processing, aerospace engineering, and oil/gas production, as it is far superior to regular steel plates in terms of durability and strength
Specification Chart of Inconel 718 Sheets & Plates
| Grade | ASTM B443 / ASME SB168 |
|---|---|
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 12 mm Thk |
| Standards | ASTM / ASME SB 168 |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Chemical Composition Of Inconel 718 Sheets & Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
|---|---|---|---|---|---|---|---|---|
| 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Mechanical Properties Of Inconel 718 Sheets & Plates
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) |
|---|---|---|---|---|
| 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |