Siddhgiri Tubes is one of the innovetar manufacturer, supplier, and exporter of these Inconel 718 flanges.
Inconel 718 Flanges, Inconel 718 Flanges Manufacturers, Inconel 718 Flanges Suppliers, Inconel 718 Flanges Stockists, Inconel 718 Flanges Exporters
Inconel 718 Flanges are made up of nickel chromium alloy. The material has high density, high temperature resistance, high acidic resistance, high strength
Inconel 718 Flanges in India, Inconel 718 Flanges Manufacturers in India, Inconel 718 Flanges Suppliers in India, Inconel 718 Flanges Stockists in India, Inconel 718 Flanges Exporters in India
The face type of the flanges vary as flat face, raised face or Alloy 718 Ring Type Joint Flange as well. The ring type joint is achieved by having two halves of the flange with a grove on the disc face and ring to embed into the groove.
Inconel 718 Flanges in Mumbai, Inconel 718 Flanges Manufacturers in Mumbai, Inconel 718 Flanges Suppliers in Mumbai, Inconel 718 Flanges Stockists in Mumbai, Inconel 718 Flanges Exporters in Mumbai
When tightened, the ring is compressed into the groove and makes a leak proof connection. The 718 Flange has 50% nickel 17% chromium and carbon, manganese, silicon, sulfur and copper in the composition. this allows the flanges to have 930MPa minimum tensile strength and 482MPa minimum yield strength with 45% elongation rate.
Specification Chart of Inconel 718 Flanges
| Standards | GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
|---|---|
| Pressure Rating ANSI | Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
| Pressure Calculation in DIN | 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
| JIS | 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
| UNI | 10Bar 16Bar 6Bar 25Bar 40Bar |
| EN | 6Bar 25Bar 40Bar 10Bar 16Bar |
| Most common Types | Threaded / Screwed / Forged / Plate |
| Production technique | Forged, Heat treated and machined |
| Shapes and Types we produce | Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
| Test | Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
| Equipment | Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
Chemical Composition Of inconel 718 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Inconel 718 | 8.4 g/cm3 | 1350 ?C (2460 ?F) | Psi ? 1,35,000 , MPa ? 930 | Psi ? 75,000 , MPa ? 517 | 42.5 % |
Mechanical Properties Of Inconel 718 Flanges
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
|---|---|---|---|---|---|---|---|---|
| Inconel 718 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | ? | 5.0 max | 58.0 min | 20.0 ? 23.0 |