Siddhgiri Tubes is one of the innovetar manufacturer, supplier, and exporter of these Inconel 600 flanges.
Inconel 600 Flanges, Inconel 600 Flanges Manufacturers, Inconel 600 Flanges Suppliers, Inconel 600 Flanges Stockists, Inconel 600 Flanges Exporters
Inconel 600 Flanges are made up of carbon, manganese, silicon, sulfur, copper, iron, and 72% nickel and 14% chromium in the chemical composition.
Inconel 600 Flanges in India, Inconel 600 Flanges Manufacturers in India, Inconel 600 Flanges Suppliers in India, Inconel 600 Flanges Stockists in India, Inconel 600 Flanges Exporters in India
It offers significant resistance to corrosion and oxidation even at elevated temperatures. This alloy has excellent mechanical strength and toughness even in cryogenic conditions. We use superior quality alloy to fabricate Inconel 600 Flanges.
Inconel 600 Flanges in Mumbai, Inconel 600 Flanges Manufacturers in Mumbai, Inconel 600 Flanges Suppliers in Mumbai, Inconel 600 Flanges Stockists in Mumbai, Inconel 600 Flanges Exporters in Mumbai
Inconel flanges are a type of pipe fitting used to connect piping or equipment sections requiring an opening to be sealed or closed. They are made from Inconel, a family of nickel-chromium-based alloys
Specification Chart of Inconel 600 Flanges
| Standards | GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
|---|---|
| Pressure Rating ANSI | Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
| Pressure Calculation in DIN | 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
| JIS | 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
| UNI | 10Bar 16Bar 6Bar 25Bar 40Bar |
| EN | 6Bar 25Bar 40Bar 10Bar 16Bar |
| Most common Types | Threaded / Screwed / Forged / Plate |
| Production technique | Forged, Heat treated and machined |
| Shapes and Types we produce | Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
| Test | Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
| Equipment | Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
Chemical Composition Of inconel 600 Flanges
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Mechanical Properties Of Inconel 600 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |