Siddhgiri Tubes is dealing as a reliable manufacturer, supplier, and exporter of Aluminium Alloy 5083 Sheets & Plates.
Aluminium Alloy 5083 Sheets & Plates, Aluminium Alloy 5083 Sheets & Plates Manufacturers, Aluminium Alloy 5083 Sheets & Plates Suppliers, Aluminium Alloy 5083 Sheets & Plates Stockists, Aluminium Alloy 5083 Sheets & Plates Exporters
Aluminium Alloy 5083 Sheets & Platess is basically a product with chromium-manganese-aluminum alloy.The product gets hardened using cold work but it isn’t treatable via heat due to higher strength.
Aluminium Alloy 5083 Sheets & Plates in India, Aluminium Alloy 5083 Sheets & Plates Manufacturers in India, Aluminium Alloy 5083 Sheets & Plates Suppliers in India, Aluminium Alloy 5083 Sheets & Plates Stockists in India, Aluminium Alloy 5083 Sheets & Plates Exporters in India
The sheets and plates of aluminum alloy 5083 are ductile so as to provide it a greater level of strength.Alloy 5083 sheets has retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.
Aluminium Alloy 5083 Sheets & Plates in Mumbai, Aluminium Alloy 5083 Sheets & Plates Manufacturers in Mumbai, Aluminium Alloy 5083 Sheets & Plates Suppliers in Mumbai, Aluminium Alloy 5083 Sheets & Plates Stockists in Mumbai, Aluminium Alloy 5083 Sheets & Plates Exporters in Mumbai
Due to the excellent ductility feature, these alloys offered by us retain good formability, highly resistance to corrosion and are applicable in marine applications. Having low density and excellent thermal conductivity
Specification Chart of Aluminium Alloy 5083 Sheets & Plates
| Standard | ASTM B209 / ASME SB209 |
|---|---|
| Dimensions | JIS, AISI, ASTM, GB, DIN, EN, etc |
| Thickness | 0.3 mm to 120 mm |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Hardness | As per ASME A & NACE MR 175 |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR) |
| Value added services for Plates | Waterjet cutting, Plasma cutting, Laser cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing |
Chemical Composition Of Aluminium Alloy 5083 Sheets & Plates
| Al | Si | Fe | Cu | Mn | Cr | Mg | Ti | Zn | Other Each | Others Total |
|---|---|---|---|---|---|---|---|---|---|---|
| Bal | 0.40 max | 0.40 max | 0.10 max | 0.40 / 1.0 | 0.05 / 0.25 | 4.0 / 4.90 | 0.15 max | 0.25 max | 0.05 max | 0.15 max |
Mechanical Properties Of Aluminium Alloy 5083 Sheets & Plates
| Proof Stress | Tensile Strength | Hardness Brinell | Elongation |
|---|---|---|---|
| 125 Min MPa | 275 - 350 MPa | 75 HB | 12 Min % |