Siddhgiri Tubes is a known manufacturer and exporter of Titanium Gr 2 Round Bars.Titanium Grade 5 Round Bar is readily accessible at Special Metals with high-quality assurance and a wide variety. Our round bar is reliable, durable, and strong.
Titanium Gr 5 Round Bars, Titanium Gr 5 Round Bars Manufacturers, Titanium Gr 5 Round Bars Suppliers, Titanium Gr 5 Round Bars Stockists, Titanium Gr 5 Round Bars Exporters
It is implemented with lightweight and tensile Aluminium, whereas Vanadium is added to increase malleable, ductile properties with the improvement of corrosion-resistant qualities.
Titanium Gr 5 Round Bars in India, Titanium Gr 5 Round Bars Manufacturers in India, Titanium Gr 5 Round Bars Suppliers in India, Titanium Gr 5 Round Bars Stockists in India, Titanium Gr 5 Round Bars Exporters in India
Titanium Gr 5 Round Bar is harder, and it functions outstandingly in acid and chloride corrosion effects and is also better immune to decay occurred in corresponding solutions.
Titanium Gr 5 Round Bars in Mumbai, Titanium Gr 5 Round Bars Manufacturers in Mumbai, Titanium Gr 5 Round Bars Suppliers in Mumbai, Titanium Gr 5 Round Bars Stockists in Mumbai, Titanium Gr 5 Round Bars Exporters in Mumbai
The surface of Bars are protected from rust and finished with several types like Matt Finish, Black bars, Bright Polished bars, Rough Turned bars, etc. It is easily inserted in multiple applications with various sizes, diameters, and lengths.
Specification Chart of Titanium Gr 5 Round Bars
| Standards | EN, DIN, JIS, ASTM, BS, ASME, AISI |
|---|---|
| Specifications | ASTM B348 / ASME SB348, ASTM B863 / SB863 |
| B3 Hastelloy Round Bars size | Diameter: 3-~800mm |
| Hastelloy B-3 Flat Bars size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Titanium Gr 5 Angle Bars size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Titanium Gr 5 Channel Bars | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Alloy B 3 Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Titanium Gr 5 Billet Size | 1/2 to 495mm Diameter |
| Titanium Gr 5 Rectangle Bar Size | 33 x 30mm to 295 x 1066mm |
| Titanium Gr 5 Hex Bar size | 2-100mm A/F |
| Titanium Gr 5 Hollow Bars | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Diameter | 20mm, 30mm, 50mm, 80mm, 100mm, 150mm, 200mm, 500mm |
| Length | 1m-12m or as required |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish | hot rolled annealed, peeled, Bright, hot-worked and cold-worked rod and bar, centreless ground, Centreless Ground and Black, Polish, Cold Rolled (CR), hot rolled ( R), smooth turned, Cold (bright) drawn, Grinding, slit rolled edge, Rough Turned. |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Cold Drawn, Hot Rolled, Forged Round Bars, Cold Rolled, Rod |
| Processing | Bars cutting to 650mm |
| Form | Rod, Round, Channel Bars, T-Bars, Flat Bars, Precision Ground Bars, Blocks, Square, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bars, Ingot, Billet, I/H Bars, Forging etc. |
Chemical Composition Of Titanium Gr 5 Round Bars
| Grade | Ni | M | Cr | Fe | W | Mn | C | Al | Ti | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| Titanium Gr 5 | 65.0 min | 28.5 | 1.5 | 1.5 | 3.0 max | 3.0 max | 0.01 max | 0.50 max | 0.2 max | 10 max |
Mechanical Properties Of Titanium Gr 5 Round Bars
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |