Siddhgiri Tubes is one of the most prominent manufacturers, exporter, stockiest and supplier of prime quality Stainless Steel 317/317L Tubes.
Stainless Steel 317/317L Pipes & Tubes, Stainless Steel 317/317L Pipes & Tubes Manufacturers, Stainless Steel 317/317L Pipes & Tubes Suppliers, Stainless Steel 317/317L Pipes & Tubes Stockists, Stainless Steel 317/317L Pipes & Tubes Exporters
Alloy stainless steel 317 is the austenitic nickel and chromium stainless steel with resistance to corrosion, the high molybdenum content is improving the pitting resistance ability.
Stainless Steel 317/317L Pipes & Tubes in India, Stainless Steel 317/317L Pipes & Tubes Manufacturers in India, Stainless Steel 317/317L Pipes & Tubes Suppliers in India, Stainless Steel 317/317L Pipes & Tubes Stockists in India, Stainless Steel 317/317L Pipes & Tubes Exporters in India
Alloy 317L is the low carbon austenitic nickel and chromium based stainless steel alloy that can be used at the applications where it is not at all possible to anneal after the welding and wherein the maximum corrosion resistance is required.
Stainless Steel 317/317L Pipes & Tubes in Mumbai, Stainless Steel 317/317L Pipes & Tubes Manufacturers in Mumbai, Stainless Steel 317/317L Pipes & Tubes Suppliers in Mumbai, Stainless Steel 317/317L Pipes & Tubes Stockists in Mumbai, Stainless Steel 317/317L Pipes & Tubes Exporters in Mumbai
Specification Chart of Stainless Steel 317/317L Pipes & Tubes
| Specifications | ASTM A312 / ASME SA312 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| Size | 1 / 8" NB - 24" NB |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Manufacturing Shapes | Hydraulic, Round, Square, Hex, Honed |
| Manufacturing Techniques | Normalized & as Rolled |
| Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Seamless Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Heat Treatment | Normalized, Normalized & Tempered |
| Packing of Seamless Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
Chemical Composition Of Stainless Steel 317/317L Pipes & Tubes
316/316L/316Ti| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| 317 | 0.08 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 14 | - |
| 317L | 0.035 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 15 | - |
Mechanical Properties Of Stainless Steel 317/317L Pipes & Tubes
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |