Siddhgiri Tubes is one of the leading manufacturers and suppliers of Nickel 201 Wires.Nickel 201 is also known as Phyweld 201.
Nickel 201 Wire, Nickel 201 Wire Manufacturers, Nickel 201 Wire Suppliers, Nickel 201 Wire Stockists, Nickel 201 Wire Exporters
Nickel 201 is a commercially pure nickel with a maximum carbon level of 0.02%. This alloy provides highly ductile mechanical properties across a wide temperature range, and corrosion resistance in neutral to moderately reducing environments
Nickel 201 Wire in India, Nickel 201 Wire Manufacturers in India, Nickel 201 Wire Suppliers in India, Nickel 201 Wire Stockists in India, Nickel 201 Wire Exporters in India
It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. With its lower carbon content, alloy 201 may be considered for service above 600°F (316°C), where alloy 200 with higher carbon content is not recommended.
Nickel 201 Wire in Mumbai, Nickel 201 Wire Manufacturers in Mumbai, Nickel 201 Wire Suppliers in Mumbai, Nickel 201 Wire Stockists in Mumbai, Nickel 201 Wire Exporters in Mumbai
A commercially pure Nickel (typically 99.6% Nickel), Nickel 201 is essentially the same as Nickel 200, but with a lower Carbon content to prevent embrittlement by inter granular carbon at temperatures over 315oC (600oF). Lower carbon content also reduces hardness.
Specification Chart of Nickel 201 Wire
| Specifications | ASTM B166 ASME SB166 |
|---|---|
| Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | 100 mm TO 6000 mm |
| Diameter | 10 mm To 100 mm |
| Specialize | Filler Wire, Coil Wire |
Chemical Composition Of Nickel 201 Wire
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties Of Nickel 201 Wire
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |