Siddhgiri Tubes is one of the leading manufacturers and suppliers of Nickel 201 Flanges.Nickel is a lustrous chemical element with a slight golden tinge.Nickel 201 Flanges are considered well suited to be used in reducing or neutral environments.
Nickel 201 Flanges, Nickel 201 Flanges Manufacturers, Nickel 201 Flanges Suppliers, Nickel 201 Flanges Stockists, Nickel 201 Flanges Exporters
Nickel 201 offers resistance against all dry gases at room temperature, this alloy grade can be conveniently utilized not only in dry chlorine but also in hydrogen chloride environments, especially at temperatures inching up to 550°C.
Nickel 201 Flanges in India, Nickel 201 Flanges Manufacturers in India, Nickel 201 Flanges Suppliers in India, Nickel 201 Flanges Stockists in India, Nickel 201 Flanges Exporters in India
Nickel 201 is an alloy of nickel that is produced with a concentration of 0.02% carbon. This alloy is highly ductile and is neutral in moderate reducing environments
Nickel 201 Flanges in Mumbai, Nickel 201 Flanges Manufacturers in Mumbai, Nickel 201 Flanges Suppliers in Mumbai, Nickel 201 Flanges Stockists in Mumbai, Nickel 201 Flanges Exporters in Mumbai
High Nickel Alloys can be formed by hot and cold rolling processes. These alloys have higher resistance against corrosion and creep rupture. These alloys can be polished to give them a smooth and aesthetic finish.
View Weight chart of UNS N02201 Weld neck raised face flange, 201 Nickel Blind Ring Type Joint Flange, Supplier of ASTM B564 Nickel 201 Blind Raised Face Flange, DIN 2.4066 Spectacle Flange in India.
Specification Chart of Nickel 201 Flanges
| Standards | GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
|---|---|
| Pressure Rating ANSI | Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
| Pressure Calculation in DIN | 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
| JIS | 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
| UNI | 10Bar 16Bar 6Bar 25Bar 40Bar |
| EN | 6Bar 25Bar 40Bar 10Bar 16Bar |
| Most common Types | Threaded / Screwed / Forged / Plate |
| Production technique | Forged, Heat treated and machined |
| Shapes and Types we produce | Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
| Test | Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
| Equipment | Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
Chemical Composition Of Nickel 201 Flanges
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties Of Nickel 201 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |