Siddhgiri Tubes is one of the leading manufacturers and suppliers of Monel K500 Flanges. Monel K500 Flange has 110MPa minimum tensile strength and 790MPa minimum yield strength. The melting point of both grades is at 1350 degrees Celsius.
Monel K500 Flanges, Monel K500 Flanges Manufacturers, Monel K500 Flanges Suppliers, Monel K500 Flanges Stockists, Monel K500 Flanges Exporters
Monel Alloy Flanges offer resistance to alkali and acidic environments. Monel 400 Flanges Manufacturer in India recommends these flanges due to their high thermal conductivity and good ductility.
Monel K500 Flanges in India, Monel K500 Flanges Manufacturers in India, Monel K500 Flanges Suppliers in India, Monel K500 Flanges Stockists in India, Monel K500 Flanges Exporters in India
Monel 400 Wire are such as high strength and durability, corrosion resistance, unique mechanical properties, detailed designs, and accurate dimensions.
Global Suppliers of Monel K500 Lap Joint Flange, Buy Certified & Tested Monel K500 Slip on Flange, Check Monel K500 Weld Neck Flange Price List.
Monel K500 Flanges in Mumbai, Monel K500 Flanges Manufacturers in Mumbai, Monel K500 Flanges Suppliers in Mumbai, Monel K500 Flanges Stockists in Mumbai, Monel K500 Flanges Exporters in Mumbai
Monel 400 Flanges is one such type of flange that is made up of monel 400 grade that is an excellent high performance alloy used in high pressure application.
Quality High Strength Alloy K500 Slip On Flange manufacturer, Check ASTM B564 UNS N05500 Blind Flange Price List
Specification Chart of Monel K500 Flanges
| Standards | GOST Flange, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN |
|---|---|
| Pressure Rating ANSI | Class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600, |
| Pressure Calculation in DIN | 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6 |
| JIS | 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K, |
| UNI | 10Bar 16Bar 6Bar 25Bar 40Bar |
| EN | 6Bar 25Bar 40Bar 10Bar 16Bar |
| Most common Types | Threaded / Screwed / Forged / Plate |
| Production technique | Forged, Heat treated and machined |
| Shapes and Types we produce | Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF),Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF) |
| Test | Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector |
| Equipment | Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine etc |
Chemical Composition Of Monel K500 Flanges
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Monel K500 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Mechanical Properties Of Monel K500 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Monel K500 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |